dc-6.0 ghz ingap hbt packaged matched gain block amplifier page 1 of 8 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. cgb7016-sc functional block diagram (sot-89) input ground output bias ground 1 2 3 4 features low operating voltage: 5v 34.0 dbm output ip3 @ 850 mhz 3.8 db noise figure @ 850 mhz 22.4 db gain @ 850 mhz 18.4 dbm p1db @ 850 mhz low performance variation over temperature sot-89 package 100% dc on-wafer testing esd protection on all die: >1000v hbm low thermal resistance: <85oc/watt pa driver amp, if amp, lo buffer amp cellular, pcs, gsm, umts wireless data and satcom transmit and receive functions catv applications electrical characteristics unless otherwise specified, the following specifications are guaranteed at room temperature in a mimix test fixture. notes: 1. test conditions in mimix eval board, vs = 5 v, id = 78 ma typ., rbias = 12 , zs = zl = 50 , oip3 tone spacing = 1 mhz, pout per tone = 6 dbm. 2. values reflect performance in recommended application circuit. 500 mhz 850 mhz 1950 mhz 2400 mhz 3500 mhz units max. typ. min. max. typ. min. max. typ. min. max. typ. min. temperature (oc) parameter small signal gain output p1db output ip3 noise figure operating current input return loss output return loss pout @ -45 dbc, acp is-95, 9 forward channels +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 73 69 23.4 24.0 18.6 21.2 34.5 37.0 3.8 3.8 78 78 12 12 12 12 83 92 21.4 21.1 17.4 17.1 32.5 32.0 73 69 11 10 10 9 22.4 22.4 18.4 18.4 34.0 34.0 3.8 3.8 78 78 15 15 13 13 11.5 11.5 23.4 23.7 4.6 5.0 83 92 18.0 17.7 16.2 15.9 29.0 28.0 73 69 17 16 13 12 19.0 19.0 17.2 17.2 30.5 30.5 4.1 4.1 78 78 25 25 18 18 11.5 11.5 20.0 20.3 4.9 5.3 83 92 16.8 16.5 15.1 14.8 28.0 27.0 73 69 16 15 13 12 18.8 19.1 5.3 5.7 83 92 17.8 17.8 16.1 16.1 29.5 29.5 4.3 4.3 78 78 24 24 18 18 db db dbm dbm dbm dbm db db ma ma db db db db dbm dbm max. typ. min. 14.6 14.6 13.5 13.5 26.5 26.5 4.5 4.5 78 78 25 25 12.5 12.5 max device voltage max device current max device dissipated power rf input power storage temperature junction temperature operating temperature thermal resistance eds (hbm) +6.0 v 130 ma 0.65 w +17 dbm -55oc to 150oc 150oc -40oc to +85oc 85o c/w 1000 v absolute maximum ratings 73 69 83 92 description the cgb7016-sc is a darlington configured, high dynamic range, utility gain block amplifier. designed for applications operating within the dc to 6.0 ghz frequency range, mimix?s broadband, cascadable, gain block amplifiers are ideal solutions for transmit, receive and if applications. these mmic amplifiers are available in an industry standard sot-89 package. mimix's ingap hbt technology and an industry low thermal resistance offers a thermally robust and reliable gain block solution. the ingap hbt die have extra pads to enable thorough dc testing. this unique test capability and the inclusion of esd protection on all die, significantly enhances the quality, reliability and ruggedness of these products. with a single bypass capacitor, optional rf choke and two dc blocking capacitors, this gain block amplifier offers significant ease of use in a broad range of applications. operation of this device above any of these parameters may cause permanent damage. april 2007 - rev 19-apr-07
noise figure vs frequency 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 2 2.5 3 3.5 frequency (ghz) noise figure (db) 25 c -40 c 85 c |s21| vs frequency 8 10 12 14 16 18 20 22 24 0123456 frequency (ghz) |s21| (db) 25 c -40 c 85 c |s11| vs frequency -30 -25 -20 -15 -10 0123456 frequency (ghz) |s11| (db) 25 c -40 c 85 c |s12| vs frequency -30 -27 -24 -21 -18 -15 0123456 frequency (ghz) |s12| (db) 25 c -40 c 85 c |s22| vs frequency -22 -20 -18 -16 -14 -12 -10 -8 0123456 frequency (ghz) |s22| (db) 25 c -40 c 85 c page 2 of 8 typical s-parameter and noise performance mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. dc-6.0 ghz ingap hbt packaged matched gain block amplifier cgb7016-sc april 2007 - rev 19-apr-07
acp @ 850 mhz vs pout 9 channels forward, 750 khz offset 30 khz bw -60 -55 -50 -45 -40 -35 -30 2 6 10 14 18 pout (dbm) acp (dbc) 25 c -40 c 85 c linearity performance - base station acp ? is-95 alt1 ch. pwr @ 850 mhz vs pout 9 channels forward, 1.98 mhz offset 30 khz bw -90 -80 -70 -60 -50 2 6 10 14 18 pout (dbm) acp (dbc) 25 c -40 c 85 c p1db vs frequency 8 10 12 14 16 18 20 0123456 frequency (ghz) p1db (dbm) 25 c -40 c 85 c oip3 vs frequency 24 26 28 30 32 34 36 0 0.5 1 1.5 2 2.5 3 3.5 4 frequency (ghz) oip3 (dbm) 25 c -40 c 85 c 1 mhz separation, 3 dbm/tone acp @ 1950 mhz vs. pout 9 forward channels, 885 khz offset 30 khz bw -70 -60 -50 -40 -30 2 6 10 14 18 pout (dbm) acp (dbc) 25 c -40 c 85 c alt1 ch. pwr @ 1950 mhz vs pout 9 channels forward, 1.25 mhz offset 12.5 khz bw -80 -70 -60 -50 -40 2 6 10 14 18 pout (dbm) acp (dbc) 25 c -40 c 85 c page 3 of 8 typical power and linearity performance mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. dc-6.0 ghz ingap hbt packaged matched gain block amplifier cgb7016-sc april 2007 - rev 19-apr-07
page 4 of 8 typical scattering parameters ( v d = +4. 3v , icc = 77 ma, t = 2 3 c, device in a 50 ohm system) frequency s 11 s 21 s 12 s 22 (mhz) (mag) (ang) (mag) (ang) (mag) (ang) (mag) (ang) 100 0.2 3 17 3 16.8 172 0.05 1 0.20 178 200 0.2 3 167 16.5 164 0.05 1 0.20 176 3 00 0.22 161 16. 3 157 0.05 2 0.20 17 3 400 0.21 154 15.9 149 0.05 2 0.20 171 500 0.20 148 15.5 142 0.05 3 0.20 169 600 0.19 142 15.1 1 3 5 0.05 3 0.20 167 700 0.18 1 3 7 14.7 128 0.05 3 0.20 164 800 0.17 1 3 2 14.2 122 0.05 3 0.20 162 900 0.16 127 1 3 .7 115 0.05 3 0.20 160 1000 0.15 122 1 3 .2 109 0.06 3 0.20 158 1100 0.14 117 12.8 10 3 0.06 2 0.20 155 1200 0.12 112 12. 3 97 0.06 2 0.20 15 3 1 3 00 0.11 107 11.9 92 0.06 1 0.20 150 1400 0.10 102 11.4 86 0.06 1 0.20 148 1500 0.09 98 11.0 81 0.06 0 0.19 145 1600 0.08 94 10.6 76 0.07 -1 0.19 14 3 1700 0.07 89 10.2 70 0.07 -2 0.19 140 1800 0.06 85 9.9 66 0.07 - 3 0.19 1 3 7 1900 0.05 80 9.5 61 0.07 -4 0.19 1 3 5 2000 0.04 75 9.2 56 0.07 -6 0.19 1 3 2 2100 0.0 3 70 8.9 51 0.08 -7 0.19 129 2200 0.0 3 64 8.6 47 0.08 -9 0.19 127 2 3 00 0.02 57 8. 3 42 0.08 -10 0.18 124 2400 0.01 45 8.0 3 8 0.08 -12 0.18 121 2500 0.01 17 7.8 33 0.08 -1 3 0.18 119 2600 0.01 -46 7.5 29 0.09 -15 0.18 116 2700 0.01 -85 7. 3 25 0.09 -17 0.18 11 3 2800 0.01 -99 7.1 20 0.09 -19 0.18 110 2900 0.02 -112 6.9 16 0.09 -20 0.18 108 3 000 0.02 -118 6.7 12 0.09 -22 0.18 105 3 100 0.0 3 -124 6.5 8 0.10 -24 0.18 102 3 200 0.0 3 -129 6.4 4 0.10 -26 0.18 100 33 00 0.0 3 -1 3 5 6.2 0 0.10 -28 0.18 97 3 400 0.0 3 -142 6.0 -4 0.10 - 3 1 0.18 94 3 500 0.04 -147 5.9 -8 0.10 - 33 0.18 91 3 600 0.04 -151 5.7 -12 0.11 - 3 5 0.18 88 3 700 0.04 -156 5.6 -16 0.11 - 3 7 0.18 85 3 800 0.04 -162 5.5 -20 0.11 - 3 9 0.19 82 3 900 0.04 -170 5.4 -24 0.11 -42 0.19 79 4000 0.04 -177 5.2 -28 0.12 -44 0.19 76 4100 0.0 3 175 5.1 - 3 2 0.12 -46 0.20 7 3 4200 0.0 3 167 5.0 - 3 6 0.12 -49 0.20 70 4 3 00 0.0 3 158 4.9 - 3 9 0.12 -51 0.21 67 4400 0.0 3 145 4.8 -4 3 0.12 -54 0.21 6 3 4500 0.0 3 1 3 0 4.7 -47 0.1 3 -56 0.22 60 4600 0.0 3 115 4.6 -51 0.1 3 -58 0.2 3 56 4700 0.0 3 100 4.5 -55 0.1 3 -61 0.2 3 5 3 4800 0.0 3 85 4.4 -59 0.1 3 -64 0.24 50 4900 0.04 71 4. 3 -6 3 0.1 3 -66 0.25 47 5000 0.04 58 4.2 -67 0.14 -69 0.26 4 3 continues n ext page. s-parameter data files are available online at: www.mimixbroadband.com mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. dc-6.0 ghz ingap hbt packaged matched gain block amplifier cgb7016-sc april 2007 - rev 19-apr-07
page 5 of 8 typical scattering parameters ( v d = +4. 3v , icc = 77 ma, t = 2 3 c, device in a 50 ohm system) frequency s 11 s 21 s 12 s 22 (mhz) (mag) (ang) (mag) (ang) (mag) (ang) (mag) (ang) 5100 0.05 48 4.1 -70 0.14 -72 0.27 3 9 5200 0.06 3 9 4.1 -74 0.14 -74 0.28 3 6 5 3 00 0.07 3 2 4.0 -78 0.14 -77 0.29 33 5400 0.08 25 3 .9 -82 0.14 -80 0. 3 029 5500 0.09 19 3 .8 -86 0.14 -82 0. 3 126 5600 0.10 1 33 .8 -90 0.15 -85 0. 3 222 5700 0.11 8 3 .7 -94 0.15 -88 0. 33 19 5800 0.12 4 3 .6 -98 0.15 -91 0. 3 515 5900 0.14 -2 3 .5 -102 0.15 -94 0. 3 612 6000 0.15 -6 3 .5 -106 0.15 -96 0. 3 78 6100 0.16 -10 3 .4 -109 0.15 -99 0. 3 85 6200 0.18 -14 3 . 3 -11 3 0.15 -102 0.40 1 6 3 00 0.19 -18 3 .2 -117 0.15 -105 0.41 -2 6400 0.20 -22 3 .2 -121 0.15 -108 0.4 3 -5 6500 0.22 -26 3 .1 -125 0.15 -111 0.44 -9 6600 0.2 3 - 3 0 3 .0 -129 0.15 -114 0.45 -12 6700 0.25 - 33 3 .0 -1 33 0.16 -117 0.47 -15 6800 0.26 - 3 72.9-1 3 7 0.16 -120 0.48 -19 6900 0.28 -40 2.8 -141 0.16 -12 3 0.49 -22 7000 0.29 -44 2.8 -144 0.16 -126 0.51 -25 7100 0. 3 0 -47 2.7 -148 0.15 -129 0.52 -28 7200 0. 3 2 -51 2.6 -152 0.15 -1 3 2 0.5 3 - 3 1 7 3 00 0. 33 -54 2.6 -156 0.15 -1 3 4 0.55 - 3 5 7400 0. 3 4 -57 2.5 -160 0.15 -1 3 7 0.56 - 3 8 7500 0. 3 5 -61 2.4 -16 3 0.15 -140 0.57 -41 7600 0. 3 7 -64 2.4 -167 0.15 -14 3 0.58 -44 7700 0. 3 8-67 2. 3 -171 0.15 -146 0.59 -47 7800 0. 3 9 -70 2.2 -174 0.15 -149 0.60 -50 7900 0.40 -7 3 2.2 -178 0.15 -151 0.61 -52 8000 0.41 -76 2.1 179 0.15 -154 0.62 -55 8100 0.42 -79 2.1 175 0.15 -157 0.6 3 -58 8200 0.4 3 -82 2.0 171 0.15 -159 0.64 -61 8 3 00 0.4 3 -85 1.9 168 0.15 -162 0.65 -6 3 8400 0.44 -88 1.9 164 0.14 -165 0.66 -66 8500 0.45 -91 1.8 161 0.14 -167 0.67 -69 8600 0.45 -94 1.8 158 0.14 -170 0.67 -71 8700 0.46 -97 1.7 154 0.14 -17 3 0.68 -74 8800 0.46 -99 1.7 151 0.14 -175 0.68 -76 8900 0.47 -102 1.6 148 0.14 -178 0.69 -79 9000 0.47 -105 1.6 144 0.14 180 0.70 -81 9100 0.47 -107 1.6 141 0.14 178 0.70 -8 3 9200 0.47 -110 1.5 1 3 8 0.1 3 175 0.71 -86 9 3 00 0.48 -112 1.5 1 3 5 0.1 3 17 3 0.71 -88 9400 0.48 -115 1.4 1 3 1 0.1 3 170 0.71 -90 9500 0.48 -117 1.4 128 0.1 3 168 0.72 -92 9600 0.48 -120 1.4 125 0.1 3 166 0.72 -94 9700 0.47 -122 1. 3 122 0.1 3 16 3 0.7 3 -96 9800 0.47 -125 1. 3 119 0.1 3 161 0.7 3 -98 9900 0.47 -127 1. 3 116 0.12 158 0.7 3 -100 10000 0.47 -1 3 0 1.2 112 0.12 156 0.7 3 -102 s-parameter data files are available online at: www.mimixbroadband.com mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. dc-6.0 ghz ingap hbt packaged matched gain block amplifier cgb7016-sc april 2007 - rev 19-apr-07
page 6 of 8 application circuit evaluation board - sc package (sot-89) 2 rf in vs rf out c1 c2 note: this schematic represents the topology of the application circuit recommended by mimix. uuuu l1 r bias = (vs - vd) / id 4 3 1 vd r1 c3 recommended bias resistor values for id = 78 ma supply voltage (v) 5v 7v 8v 10v rbias (r1 description: 1206 1/4w 1%) 12 37 50 ?? rbias (r1 description: 1210 1/2w 1%) ? ? note: rbias provides dc bias stability over temperature. 76 ref designator value description size c1, c2 1000 pf mch185a101jk 0805 c3 1.0 f vitr 1.0 f 25v cer 0805 cap 0805 x7r 10% l1 56 nh coilcraft 0603 cs 10% 0603 0 1 2 1 / 6 0 2 1 d i / ) d v - s v ( = s a i b r 1 r a / n ) e c a l p t o n o d ( p n d 4 c mimix mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. dc-6.0 ghz ingap hbt packaged matched gain block amplifier cgb7016-sc april 2007 - rev 19-apr-07
page 7 of 8 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. physical dimensions - sc package (sot-89) 123 4 xxxxxxx xxxxxx zyyww dimensions in millimeters [inches] 4.50 [0.177] 1.73 [0.068] 0.46 [0.18] 3x 1.50 [0.059] 3.00 [0.118] 0.76 [0.030] 0.38 [0.015] 0.38 [0.015] 4.41 [0.163] 1.55 [0.061] 2.50 [0.096] 0.71 [0.028] markings: xxxxxxx = mimix model no. xxxxxx = wafer lot no. zyyww = date code (yr/week) first letter country of origin if other that usa 0.99 [0.039] 0.58 [0.023] 0.64 [0.025] 0.86 [0.034] 1.27 [0.050] 3.48 [0.137] 5.33 [0.210] 3.86 [0.152] 1.70 [0.067] 2.06 [0.081] 0.41 [0.016] dc-6.0 ghz ingap hbt packaged matched gain block amplifier cgb7016-sc april 2007 - rev 19-apr-07
page 8 of 8 ordering information part number for ordering description CGB7016-SC-0G00 matte tin plated rohs compliant sot-89 surface mount package in bulk quantity cgb7016-sc-0g0t matte tin plated rohs compliant sot-89 surface mount package in tape and reel pb-cgb7016-sc-0000 evaluation board for sot-89 packaged device with sma connectors we also offer the plastic packages with snpb (tin-lead) or nipdau plating. please contact your regional sales manager for more information regarding different plating types handling and assembly information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: do not ingest. do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. care should be taken not to apply heavy pressure to the top or base material to avoid package damage. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs compliant components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts is 100% matte tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) ?pb free? processes. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. dc-6.0 ghz ingap hbt packaged matched gain block amplifier cgb7016-sc april 2007 - rev 19-apr-07
|
